Economic Universal Device Programmer
+ Highly cost effective high speed universal programmer
+ PC-USB 1.1 / 2.0 interface
+ Multi-socket program mode (concurrent programming mode)
 

SPEEDPRO is a high-speed universal device programmer for USB 2.0 PC-interface. It programs a 64Mbit flash memory in 42 seconds. This is a true low-price production oriented system.
The SPEEDPRO meets the demands of today's programming solution for lab applications.

With high throughput and maximum flexibility , you won't have to worry about a production bottleneck keeping your design off the market. As many as eight SPEEDPRO programmers can be connected together, controlled by a single PC with no loss of programming speed, reliability or performance. Each programming site is completely independent of the rest. With independent programming sites, a faulty site can be removed and programming can be continued. Each site is an independent universal programmer, and the system will completely program the first device by the time the operator has inserted the last device.

SPEEDPRO is the state-of-art universal programmer offers you the most advanced programming facilities with the most user friendly interface. Since each pin is software addressable, new part numbers are being added to the list of supported devices through software upgrades. No new hardware to buy! It will prove to be one of the most reliable and long lasting instruments.

The SPEEDPRO supports the latest device technologies, regardless of package type.

ProView features SPEEDPRO programmers in the multiple-programming mode for high volume production purpose. The Gang Program Mode (Concurrent Programming Mode) can program any device and the fault-tolerant architecture allows the programmer to continue production even if one of the programmers should fail.

Software description :
Supports full WINDOW 95 / 98 / 2000 / NT and XP
Auto search device select function supports E(E)PROMs & Microcontrollers
Device insertion test identifies improperly inserted device before programming
  Check for incorrect device insertion, backward, incorrect position, and poor pin contact
High-speed device function tests and user creatable test library
Device Operations: Read, Blank check, Program, Verify, Checksum, Data compare, Security,
Auto(blank check-program-verify), Option Bit program
Display programming parameters and optional bit information on the screen
Set device/buffer address ranges before programming devices
Extensive on-line F1 help system provides text and graphics
User-changeable programming parameters
Gang Program Mode allows programmers up to 8 units as concurrent programming system.
(START ALL key enable to program the programmers simultaneously)
Built-in editor for both buffer date and test vectors
Support Binary and all hex files (POF and JEDEC, Intel Hex, Motorola S Records, Tek hex, hex-space, Extended Tekhex, and others; automatic file type recognition ) with Load, Edit, and Save Commands
Distribution of 16- and 32- bit data into 8-bit portions
Hardware description :
On-board FPGAs for extremely fast communication
Supports real low-voltage(5, 3.3, 2.7, 1.8 volts) support:
Detects all pin locations for poor or damaged pin contacts
  External "Start" key allows customer to execute auto program parameters without PC command
Detects all pin locations for poor or damaged pin contacts
External switching power supply, 100-240 VAC
Current limiting protects hardware circuit from improperly inserted or defective chips
and operation errors
Standard 48-pin ZIF(Zero Insertion Force) socket accepts both 300mil and 600 mil DIP devices
True universal pin driver hardware
Support a high-speed USB2.0 port for PC interface
Support a standard IEEE-1149.1 (JTAG) port
Hardware diagnostic program exams all socket-pin drivers before using
 
Dimension :
Module: 7.5"(L) x 8.25"(W) x 2.5"(H)
Weight: 4.25 lbs
Optional adapter :
Programming adapter's for non-standard DIP package
SPEEDPRO programmer with 48pin ZIF(DIP) socket
Package :
External universal switching power supply :
Input 110 -240 VAC, 50/60 Hz, 0.6 AMP,.Output 12 VDC, 2.0 AMP
5 feet long USB cable and User's manual in CD-ROM
System requirement :
Type : Pentium PC or compatibles. PS/2, Portable(notebook) computer.
A hard disk drive(200 Megabytes) is recommended for software installation and operation
PC RAM size : 256Mb of conventional memory
I/O port : USB 1.1 or 2.0
OS : WIN98se/NT/2000/XP or greater
Support device :
Serial Flash M25Pxx, MX25Lxx, S25LFxx, SST25VFxxx
Flash Memory 28Fxxx, 29Fxxx, 38Fxxx, 29LVxxx, 26LVxxx, 29GLxxx, 29ALxxx, 29Wxxx, 36xxx, 32HFxxx, 34VFxxx, 37VFxxx, ,39SFxxx, 39VFxxx, 45LFxxx, 49LFxxx, 50FWxxx
EPROM 27xxx and 27Cxxx series, from 16Kbit to 32Mbit with 8-bit/16-bit data width
EEPROM  27Exxx, 28xxx , and 28Cxxx series
Flash EPROM 256Kbit to 32Mbit 28Fxxx, 29Fxxx, 29Cxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series
Serial E(E)PROMs 24Cxx, 24Fxx, 25Cxx, 59Cxx, EPC1/1213/1648, and 93Cxx
Bipolar PROM 27Sxx, 7Cxxx, 71xx, 74Sxx, 87Sxx, 82Sxx
isp LOGIC series ispLSI(10/20)xx, ispGAL22V10, ispGDS1(2)x, LC40(41)xx M4Axxx series
PALCEs, GALs 16V8, 20V8, 22V10, 20RA10, 26V12 series
Dallas NV RAMs DS12xx, DS13xx, DS15xx, DS16xx series
PEELs 153, 173, 253, 273, 18CV8, 20CG10 series
EPLDs PLCxxx, PLSxxx, PLUSxxx, Epxxx, EPCxxx, EPMxxx, PLDxxx, 5Cxxx, 85Cxxx series
SPLDs, CPLDs ATF16/20/22Vxx, ATV750/1500/2500
MACH series MACH1xx/2xx/4xx, and xxx-SP series
MAX series MAX5000, MAX7000 series
8748 8741, 8742, 8748, 8749 series
8751 Microcontrollers 87C51/52, -FA, -FB, -FC, '528, '652, '654, '54
89Cxx, 89Sxx, 89LVxx, 89Cxxxx, DCF85xx, 85(87/89)LPCxxx, PXAxx series, 87C751/752
SGS-Thomson ST62xx, ST7xx, ST9xx, ST10xx series
Xilinx EPLDs XC17Sxxx, 17Vxxx, 72xx, 73xx, XCF01 / 02 / 04 series
WSI's PSD3xx Psd311
MCHP's PICs PIC12Cxxx, PIC16xxx, 17xxx series
Motorola MC68705, MC68HC705, MC68HC711, MC68HC908, MC9S08 series
Zilog Z86Cxx, Z86Exx series
Programming speed with 100% data in memory (min:sec) :

Device P/N

Read

Blank

Prog

Verify

Erase

AM29F032B

4.70

4.80

56.24

4.73

38.16

AM29LV128ML

6.70

6.65

03:26.00

6.65

 

AM29LV256MH

17.41

16.00

04:06.16

16.77

 

AM29LV641DH

4.20

4.43

42.02

4.44

 

E28F128J3A

9.93

7.49

1:55

7.75

01:43.30

E28F128J3C

9.93

7.49

02:01.80

7.75

30.31

E28F640J3C

4.27

4.09

70.02

4.19

17.5

K8D3216UTC-T

2.47

2.47

22.17

2.51

 

MX26L004BQC

0.81

0.81

28.24

0.81

31.87

MX29LV641MH

 

4.86

01:10.40

4.83

 

RD38F2040

3.09

3.09

18.71

3.09

53.47

RD38F4050

18.81

 

 

18.30

04:41.8